Description

مكينة هانكاي 3.5 حصان خلط بنزين وزيت تو استروك

خفيفة الوزن نسبيا

تبريد عن طريق مضخة ماء

مناسبة للدنقيات والقوارب الألمنيوم

تحتوي على قطع غيار

سرعتها حسب حالة البحر والحمولة ونوع القارب

Technical Data:

Overall length: 92CM

Overall width: 36.5cm

Overall height: 22cm

Transom height: 42cm

Full throttle perating range: 4000-5000r/min

Maximum output: 2.5kw(3.5HP)

Type: 2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark: 7-1/45-A(inch)

The engine and the propeller ratio: 2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 30:1

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

How to start the engine

(1) Plug the emergency turn-off cable plate in the switch groove.
(2) Plug the oil inlet plug for transferring fuel in the Fuel tank socket.
(3) Plug the oil outlet plug in the tubing socket of motor’s bottom.
(4) Spin and loose the venting screw in the fuel tank cap in a counter clockwise direction.
(5) Extrude the pump a few times until the area is full with fuel and the pump goes hard.
(6) Pull shift handle to neutral position.
(7) Turn throttle handle to “start” .
(8) When the engine cooled, pull out the choke valve to increase the concentration of combustible mixture gas and be more convenient and easier to start.
(9) Pull the starting handle, until the initiator of the claw and the flywheel plate mesh.
(10) After the engine runs, idle operate it for 2 to 3 minutes to warm up, then pull all the choke valve to the initial position.
(11) After the engine runs, check cooled water stablety flows or not. If there’s no water or stable flowing, turn off the engine and seek for the reason.